Navy Terry Towelling - Venus/Access table top (1410mm) for tables with an extendable footrest

The Navy Terry Towelling – Venus/Access table top (1410mm) with an extendable footrest is a premium Australian made Terry towelling cover with fitted elastic, and adjustable velcro straps to ensure you can achieve the perfect fit for a slip free treatment. All Athlegen Terry Towelling covers are 100% Cotton.

Protect your electric table with a premium, Australian made Terry towelling cover.

Covers are made to suit Athlegen ProLift Access and Venus Ranges of electric treatment tables with a Shorter Body Section. It will suit tables with a body section length of around 1410mm in body length and between 610 and 760mm in width in either the contoured or straight sided shapes.

The Terry Towelling covers are available in two colours, Navy or White. The colours shown are the best representation of the true colour we could come up with, but the colours will differ from screen to screen and from between batches of manufactured covers.

Suitable for:

Length: Around 1410mm

Width: 610-760mm

Athlegen tables with a shorter main body section of 1410mm (previously Silver and Gold models) Pro-Lift Access, Athlegen Pro-Lift Access ABR, Athlegen Pro-Lift Access RMS and Athlegen Pro-Lift Venus. It will also suit old Pro-Lift Universal tables with a similar body length.

Please refer to the Ordering Guide Diagram below for further information:

• Premium Terry Towelling fabric available in Navy or White
• Australian Made by Athlegen
• Elastic Fitting Edged
• Velcro Cross Straps
• In-built holes for accessories including removable headrest, removable manicure armrests and extendable footrests

Care Instructions:

COLD/WARM Machine Wash only

DO NOT Bleach                                           DO NOT Leave wet in Machine
DO NOT Dry Clean                                    DO NOT Mix Colours & Whites

DO NOT Tumble Dry

Fitting Instructions:

When fitting you Athlegen table cover, start at the foot end where the Athlegen care label is.

Tuck the cover underneath the foot end of the table and walk the cover up to the head end holding both sides.

Attach the supplied adjustable straps to the small sewn in loops on the cover. Loop and strap positions are marked in diagram below.

Adjust straps as necessary for desired fit.